LAN-CAT5e-P+II (R)
IEC category C2/D1 compliant
Conforming standards
- IEC 61643-21
- UL File Number: E140906
- RoHS compliant
Features
- Discharge type circuits
- Gigabit Ethernet 1000 Base-T enabled
- PoE+ (IEEE802.3at) enabled
- DIN rail mountable (35mm)
- Mountable on conductive DIN rail for batch earthing
New !! Easy checking deterioration
Application
- Gigabit Ethernet
- Network cameras
- Wireless LAN accress point
- VoIP enabled telephones and servers
- Outdoor installed network devices
Characteristics
| connector | ― | RJ-45 | 8-pole8-core |
| Supported Lines | ― | 10BASE-T 100BASE-TX 1000BASE-T 2.5GBase-T PoE PoE Plus PoE up to 60W |
IEEE802.3 IEEE802.3u IEEE802.3ab IEEE802.3bz IEEE802.3af IEEE802.3at |
| Transmission bandwidth used | ― | DC ～ 100 MHz | ― |
| Transmission Loss | ― | ≤ 1.0 dB | ― |
| Near-end crosstalk attenuation | ― | >32.3 dB | ― |
| Coding error rate | ― | 0.01 % or less | ― |
| Maximum continuous working voltage UC | ― | DC 60 V | Between each line and ground |
| Rated current | ― | 2,400 mA | IEEE802.3af, IEEE802.3at |
| Breakdown voltage | 100 V/s | 160 V ～ 300 V | Between each line and ground |
| Voltage Protection Level Up | 1.2/50 μs, 10 kV | 500 V or less | Between each line and ground |
| Impulse durability | 8/20 μs | 5 kA, 10 times | Category C2 |
| Impulse durability | 10/350 μs | 2.5 kA, 2 times | Category D1 |
| AC durability | 50 Hz, 0.5 A, 1s | 5 times | ― |
| Impulse Reset | DC 60 V, 600 mA | Within 30 ms | Between PoE power supply terminals |
| Insulation Resistance | DC 60 V | 1,000 MΩ or more | Between each line and ground |
| Deterioration diagnosis | In a dedicated tester | LED on: Normal / LED off: Deterioration (replacement required) | ― |
| mass | ― | about 55 g | ― |
External view
